As model validators, we frequently find ourselves in the middle of debates between spreadsheet owners and enterprise risk managers over the question of whether a particular computing tool rises to the level of a “model.” To the uninitiated, the semantic question, “Is this spreadsheet a model?” may appear to be largely academic and inconsequential. But its ramifications are significant, and getting the answer right is of critical importance to model owners, to enterprise risk managers, and to regulators.

Stakeholders of Model Validation

In the most important respects, the incentives of these stakeholder groups are aligned. Everybody has an interest in knowing that the spreadsheet in question is functioning as it should and producing accurate and meaningful outputs. Appropriate steps should be taken to ensure that every computing tool does this, regardless of whether it is ultimately deemed a model. But classifying something as a model carries with it important consequences related to cost and productivity, as well as overall model risk management.

It is here where incentives begin to diverge. Owners and users of spreadsheets, in particular, are generally inclined to classify them as simple applications or end-user computing (EUC) tools whose reliability can (and ought to) be ascertained using testing measures that do not rise to the level of formal model validation procedures required by regulators.1 These formal procedures can be both expensive for the institution and onerous for the model owner. Models require meticulous documentation of their approach, economic and financial theory, and code. The painstaking statistical analysis is frequently required to generate the necessary developmental evidence, and further cost is then incurred to validate all of it.

Enterprise risk managers and regulators, who do not necessarily feel these added costs and burdens, may be inclined to err on the side of classifying spreadsheets as models “just to be on the safe side.” But incurring unnecessary costs is not a prudent course of action for a financial institution (or any institution). And producing more model validation reports than is needful can have other unintended, negative consequences. Model validations pull model owners away from their everyday work, adversely affecting productivity and, sometimes, quality of work. Virtually every model validation report identifies issues that must be reviewed and addressed by management. Too many unnecessary reports containing findings that are comparatively unimportant can bury enterprise risk managers and distract them from the most urgent findings.

Definition of a Model

So what, then, are the most important considerations in determining which spreadsheets are in fact models that should be subject to formal validation procedures? OCC and FRB guidance on model risk management defines a model as follows:2

A quantitative method, system, or approach that applies statistical, economic, financial, or mathematical theories, techniques, and assumptions to process input data into quantitative estimates.

The same guidance refers to models as having three components:

  1. An information input component, which delivers assumptions and data to the mode
  2. A processing component, which transforms inputs into estimates
  3. A reporting component, which translates the estimates into useful business information

This definition and guidance leave managers with some latitude. Financial institutions employ many applications that apply mathematical concepts to defined inputs in order to generate outputs. But the existence of inputs, outputs, and mathematical concepts alone does not necessarily justify classifying a spreadsheet as a model.

Note that the regulatory definition of a model includes the concept of quantitative estimates. The term quantitative estimate implies a level of uncertainty about the outputs. If an application is generating outputs about which there is little or no uncertainty, then one can argue the output is not a quantitative estimate but, rather, simply a defined arithmetic result. While quantitative estimates typically result from arithmetic processes, not every defined arithmetic result is a quantitative estimate.

For example, a spreadsheet that sums all the known balances of ten bank accounts as of a given date, even if it is supplied by automated feeds, and performs the summations in a complete lights-out process, likely would not rise to the level of a model requiring validation because it is performing a simple arithmetic function; it is not generating a quantitative estimate.3

In contrast, a spreadsheet that projects what the sum of the same ten bank balances will be as of a given future date (based on assumptions about interest rates, expected deposits, and decay rates, for example) generates quantitative estimates and would, therefore, qualify as a model requiring validation. Management and regulators would want to have comfort that the assumptions used by this spreadsheet model are reasonable and that they are being applied and computed appropriately.

Is this Spreadsheet a Model?

We have found the following questions to be particularly enlightening in helping our clients determine whether a spreadsheet should be classified as 1) a model that transforms inputs into quantitative estimates or 2) a non-model spreadsheet that generates defined arithmetic results.

Question 1: Does the Spreadsheet Produce a Demonstrably “Right” Answer?

A related question is whether benchmarking yields results that are comparable, as opposed to exactly the same. If spreadsheets designed by ten different people can reasonably be expected to produce precisely the same result (because there is only one generally accepted way of calculating it), then the result probably does not qualify as a quantitative estimate and the spreadsheet probably should not be classified as a model.

Example 1 (Non-Model): Mortgage Amortization Calculator: Ten different applications   would be expected to transform the same loan amount, interest rate, and term information into precisely the same amortization table. A spreadsheet that differed from this expectation would be considered “wrong.” We would not consider this output to be a quantitative estimate and would be inclined to classify such a spreadsheet as something other than a model.

Example 2 (Model): Spreadsheet projecting the expected UPB of a mortgage portfolio in 12 months:  Such a spreadsheet would likely need to apply and incorporate prepayment and default assumptions. Different spreadsheets could compute and apply these assumptions differently, without one particularly   necessarily   being recognized as “wrong.” We would consider the resulting UPB projections to be quantitative estimates and would be likely to classify such as spreadsheet as a model.

Note that the spreadsheets in both examples tell their users what a loan balance will be in the future. But only the second example layers economic assumptions on top of its basic arithmetic calculations. Economic assumptions can be subjected to verification after the fact, which relates to our second question:

Question 2: Can the Spreadsheet’s Output Be Back-Tested?

Another way of stating this question would be, “Is back-testing required to gauge the accuracy of the spreadsheet’s outputs?” This is a fairly unmistakable indicator of a forward-looking quantitative estimate. A spreadsheet that generates forward-looking estimates is almost certainly a model and should be subjected to formal model validation.

Back-testing would not be of any particular value in our first (non-model) example, above, as the spreadsheet is simply calculating a schedule. In our second (model) example, however, back-testing would be an invaluable tool for judging the reliability of the prepayment and default assumptions driving the balance projection.

Question 3: Is the Spreadsheet Simply Applying a Defined Set of Business Rules?

Spreadsheets are sometimes used to automate the application of defined business rules in order to arrive at a prescribed course of action. This question is a corollary to the first question about whether the spreadsheet produces output that is, by definition, “correct.”

Examples of business-rule calculators are spreadsheets that determine a borrower’s eligibility for a particular loan product or loss mitigation program. Such spreadsheets are also used to determine how much of a haircut to apply to various collateral types based on defined rules.

These spreadsheets do not generate quantitative estimates and we would not consider them models subject to formal regulatory validation.

Should I Validate This Spreadsheet?

All spreadsheets that perform calculations should be subject to review. Any spreadsheet that produces incorrect or otherwise unreliable outputs should not be used until its errors are corrected. Formal model validation procedures, however, should be reserved for spreadsheets that meet certain criteria. Subjecting non-model spreadsheets to model validation unnecessarily drives up costs and dilutes the findings of bona fide model validations by cluttering enterprise risk management’s radar with an unwieldy number of formal issues requiring tracking and resolution.

Spreadsheets should be classified as models (and validated as such) when they produce forward-looking estimates that can be back-tested. This excludes simple calculators that do not rely on economic assumptions or apply business rules that produce outputs that can be definitively identified before the fact as “right” or “wrong.”

We believe that the systematic application of these principles will alleviate much of the tension between spreadsheet owners, enterprise risk managers, and regulators as they work together to identify those spreadsheets that should be subject to formal model validation.


[1] In the United States, most model validations are governed by one of the following sets of guidelines: 1) OCC 2011-12 (institutions regulated by the OCC), 2) FRB SR-11 (institutions regulated by the Federal Reserve) and 3) FHFA 2013-07 (Fannie Mae, Freddie Mac, and the Federal Home Loan Banks). These documents have much in common and the OCC and FRB guidelines are identical to one another.

[2] See footnote 1.

[3] Management would nevertheless want to obtain assurances that such an application was functioning correctly. This, however, can be achieved via less intrusive means than a formal model validation process. This might be addressed via conventional auditing, SOX reviews, or EUC quality gates. All of these are less intrusive.